The Lancashire entrance driveway gate is a slightly different take on our Hampshire design with slightly more curves adding that more smooth look.
It’s the ideal gate to either complement picket fencing / panels, or just to finish off your driveway, especially good as a pair.
Made from Kiln dried soft wood.
Mortice and tenon joints, 70mm stiles and top rails, the rails are 75 x 25mm with every other rail morticed into the head and hanging, made from sodtwwood.
Can be made up to 4m wide and 1.5m high, please email firstname.lastname@example.org for quotes. Just let us know the gap you have and we will do the rest.
We can also supply the posts and all iron work too.
Please note all of our Bespoke Entrance Driveway gates are made to order and will be around 21 days to hand make in our workshop. Would also need to know if required left or right hand hang?
****PLEASE NOTE THE PICTURE FOR ILLUSTRATION PURPOSES ONLY AND WHEN TREATED THESE GATES WILL HAVE A SLIGHTLY GREENER APPEARANCE****
The height of the curve is approximately 177cm
A = 1050MM
B = 1175MM