THE CHESHIRE PRESSURE TREATED BESPOKE WOODEN DRIVEWAY ENTRANCE GATES – ALL SIZES

£445.95

9 in stock

Category:

Description


THE CHESHIRE DRIVEWAY ENTRANCE GATES

  photo curved_zpswckv6bjh.jpg

*****ABOVE ARE THE ACTUAL GATES YOU WILL RECEIVE*****

LISTING IS FOR A PAIR OF GATES 1.2M WIDE AND 1.2M HIGH FOR  £445.95  
PLEASE EMAIL FOR A QUOTE FOR OTHER SIZES ROROUKSALES@GMAIL.COM

PLEASE LET ME KNOW IF YOU WOULD LIKE THEM RISING FROM THE END OF THE GATES OR FROM THE MIDDLE – SEE PICS

The Cheshire entrance driveway gate is a half panel framed ledge brace gate made from 75mm x 50mm Redwood, the bottom half consisting of tongue and groove jointing and with the top half moticed with 75mm x 25mm timber. 


Can be made up to 3.0m wide and 2.1m high.



It’s the ideal gate to either complement picket fencing / panels, or just to finish off your driveway, especially good as a pair or a wider single gate. Very stylish looking gate. 


Made from Kiln dried soft wood.


Mortice and tenon joints, 70mm stiles and top rails, the rails are 75 x 25mm with every other rail morticed into the head and hanging, made from softwood.


Please email rorouksales@gmail.com for quotes. Just let us know the gap you have and we will do the rest.

We can also supply the posts and all iron work too.


This advert is for a 0.9m High x 0.9m Cheshire single gate.


Please note all of our Bespoke Entrance Driveway gates are made to order and will be around 15 days to hand make in our workshop. Would also need to know if required left or right hand hang?


 photo madeinbritain1_zpsde47a157.png

Additional information

Type

Material